Hardware Parts
Mounting hardware, cables, sensors, and accessories.
Running a legacy Matthews Evolution line? Keep it coding with aftermarket inks, parts & in-house cartridge programming, through qualified distributors.
Evolution supportAnser X1 Power Adapter (24 V)
SKU: HW-X1-PSU
Hardware Parts
Replacement power adapter for the Anser X1 controller.
Anser Encoder Kit — 300 DPI
SKU: HW-ENC-300
Hardware Parts
Encoder kit that tracks line speed so codes print at a consistent size. Includes the bracket and cables.
Anser Encoder Kit — 400 DPI
SKU: HW-ENC-400
Hardware Parts
Encoder kit that tracks line speed so codes print at a consistent size. Includes the bracket and cables.
Anser Encoder Kit — 1,200 DPI
SKU: HW-ENC-1200
Hardware Parts
High-resolution encoder kit on a spring-loaded arm, for precise speed tracking.
Anser IR Reflective Sensor Kit
SKU: HW-SNS-IR
Hardware Parts
Product-detection sensor that triggers each print, with its mounting bracket.
Anser M8 4-pin Cable — 2 m
SKU: HW-CBL-M8-2
Hardware Parts
Connection cable for an encoder or sensor.
Anser X1 Printhead Cable (M16 14-pin) — 2 m
SKU: HW-CBL-M16-02
Hardware Parts
Replacement printhead cable for the Anser X1's printheads (Type-H, HI-Pro and T1XL).
Anser X1 Printhead Cable (M16 14-pin) — 5 m
SKU: HW-CBL-M16-05
Hardware Parts
Longer printhead cable for the Anser X1's printheads (Type-H, HI-Pro and T1XL), for a controller mounted further from the head.
Anser X1 Printhead Cable (M16 14-pin) — 10 m
SKU: HW-CBL-M16-10
Hardware Parts
Longer printhead cable for the Anser X1's printheads (Type-H, HI-Pro and T1XL), for a controller mounted further from the head.
Anser X1 Printhead Cable (M16 14-pin) — 15 m
SKU: HW-CBL-M16-15
Hardware Parts
Longer printhead cable for the Anser X1's printheads (Type-H, HI-Pro and T1XL), for a controller mounted further from the head.
Anser M8 4-pin Splitter (1M/2F)
SKU: HW-SPL-M8
Hardware Parts
Connects an encoder and a sensor to one printhead M8 4-pin port.
Anser IP65 Alarm Kit
SKU: HW-ALM-IP65
Hardware Parts
Light tower with buzzer that signals printer status on the line.
Anser HI-Pro Printhead Bracket Kit
SKU: HW-BRK-HIPRO
Hardware Parts
Spare mounting bracket kit for the Anser HI-Pro printhead. Every HI-Pro set already includes one.
Printhead Carriage Driver Board for EV
SKU: HW-DRV-EV01
Hardware Parts
The printhead carriage CPU / driver board for EV printhead modules — the board behind firing faults, missing segments and message errors. Lets a printhead be repaired at board level instead of replaced whole.
Pogo Pin Set for EV Printhead Modules (Pack of 10)
SKU: HW-PIN-001
Hardware Parts
A pack of 10 replacement pogo pin sets for EV printhead modules. Each set re-pins one carriage pogo board, so one pack covers ten boards. Worn or dirty contact pins are the first thing to check when codes go faint, patchy or intermittent.
Pogo Board for EV — Carriage Pogo Assembly
SKU: HW-POGO-EV01
Hardware Parts
The carriage pogo assembly that carries the electrical contact between the cartridge and the driver board in EV printhead modules. Completes the contact-fault repair path alongside the pogo pins and the carriage driver board.
Battery shown for illustration; not included.
SPH Mobile Kit
SKU: HW-SPH-MOBILE
Hardware Parts
Turns the Anser Smart Printhead into a battery-powered handheld coder — mark cartons, pallets, and drums anywhere on site. Pair it with the optional WiFi Dongle and the NexLink app (Android) to edit and send messages. Part of the SPH Expansion Kit.
SPH WiFi Dongle
SKU: HW-SPH-WIFI
Hardware Parts
Wireless connectivity for the Anser Smart Printhead — instant, cable-free connection to the NexLink app or Xonnect.
SPH ZShape Stitching Bracket
SKU: HW-SPH-ZBRACKET
Hardware Parts
Mechanical bracket that stitches multiple Anser Smart Printhead units: two for about 1" of print height, four for 2" (50 mm), with clean alignment and consistent large-format quality.
SPH I/O Box
SKU: HW-SPH-IOBOX
Hardware Parts
Synchronizes multiple Anser Smart Printhead units on one line — one encoder, one sensor, less cabling. Needed to connect the encoder, sensor and light tower at the same time; a single encoder or sensor connects with the DB9 cable included with the SPH.
Ready to Order?
Contact us to place an order or request a quote. Our team is ready to help you find the right solution.